This suggests that the printer has some kind of technical issue. To find a solution to Canon Printer Error Code 5010 Solution issue, please follow these steps:
Open the printer from the top by inverting it.
Turn off the power source, and then look about for a location that might house a purging unit.
Canon printer error “5010” implies a purge unit issue. If your product’s warranty hasn’t expired, you can have it serviced at a Canon repair center. If your warranty has ended, you’re responsible for maintenance.
In order to make use of the printer, you must first turn the power supply on to it and then open it from the top. This will free the carriage and let it move to the center of the machine. After the carriage arrives, cut the power. The cleansing unit is near the carriage. It is reasonable to anticipate that the package will come equipped with two plastic wiper blades, as well as two ink pads.
Put on some rubber gloves, and then carefully move the windshield wiper blades forward before releasing their grip and allowing them to return to their starting position. Because everything operates on a spring mechanism, you should steer clear of performing anything that needs applying force. It is the responsibility of the carriage, when it is in the parked position, to clean the bases of the cartridges.
Sticky ink residue can be removed by blotting it with a hot-water-soaked paper towel. This removes ink residue. Sticky ink residue makes walking difficult. In addition, you need to clean the area that is all around the top of the purging unit. The following thing you need to do is apply some light pressure on the ink pads, and then check to see if you can slide the cartridge back into position by around half an inch. Canon Printer Error Code 5010 Solution.
Examine the area immediately surrounding the purge unit to see whether there are any pieces of crumpled paper. When removing anything that can be seen, proceed with extreme caution at all times. If you pull something with an excessive amount of force, the gears inside the printer could become broken. Turn on the printer after connecting it to a power source. After that, replace the device’s lid and plug it in. Conduct research to determine whether or not you can establish that taking this method is successful.
Canon printer error “5010” implies a purge unit issue. If your product’s warranty hasn’t expired, you can have it serviced at a Canon repair center. If your warranty has ended, you’re responsible for maintenance.
In order to make use of the printer, you must first turn the power supply on to it and then open it from the top. This will free the carriage and let it move to the center of the machine. After the carriage arrives, cut the power. The cleansing unit is near the carriage. It is reasonable to anticipate that the package will come equipped with two plastic wiper blades, as well as two ink pads.
Also read: https://www.betaposting.com/apply-these-10-secret-techniques-to-improve-cakes/