Both electronics and electrical equipment are an integral part of any business or otherwise, because of which it is essential to engage in their waterproofing. But many of the small or medium scale businesses don’t have much budget to buy waterproof equipment. That’s why when the act of nature comes, all of this equipment ends up offering all the electrical equipment some water damage.
Now the question arises is there any possibility to recover from these lost appliances? If yes then how to do it. So, let’s explore the process of recovery of electrical appliances.
But before we move to the steps of recovery, let’s talk about essential tips which will help you to recover your electrical equipment from water damage: –
- Until everything is clean and dry, disconnect all devices from the power source and remove all batteries.
This is because introducing electricity might cause a short circuit. Which might be dangerous to the gadget. - If the equipment is susceptible, it is vital to avoid static build-up
- According to ESFI, all the equipment must be evaluated by water-damaged electrical equipment electricians of Professinal Electrical Contractors
Steps to recover equipment from water damage
- Rinse equipment with clean water
Before doing any additional maintenance, pure water should be used to remove any silt, sediment, or particle matter from electrical equipment. Remove the equipment after that to examine all of the internal components before flushing with water until the rinse water is clean.
In addition to that, you can also dip the equipment into any drum or tank of clean water to dislodge trapped contaminants.
Moreover, according to the Electrical Contractors San Diego, you can also use spray components to clean them if clean water is not there. After rinsing the equipment, place it on a flat surface and allow it to drain.
- Remove all remaining grease, oil, sludge, and various other disgusting residues.
This is the next step that will help you remove all the excess grease, oil, and sludge you have missed in the first step. However, for this step, you need to be pro so that you can move further to make the equipment work. Many different solvents can help you to complete this step.
Moreover, to remove caked-on grease, sludge, and other contamination, you can take the help of a brush that you can buy from the market. Make sure you will clean all the equipment areas and left to dry before returning to regular use.
- Protect your metal
Once you have completed cleaning and drying, the next step is to clean and protect all the metal surrounding the electrical equipment. For this, you must use a 5 in 1 spray over the metal part to protect the metal from oxidation and corrosion.
However, ensure that you only use that spray on low voltage areas, some electrical contacts, and metals.
- Test your equipment
Finally, prior to the final operation, test your equipment to ensure correct resistance levels have been attained. If the equipment has not reached the required levels, step 2 of the process must be repeated.Finally, once the right resistance level has been achieved, activate the equipment under no-load conditions and allow it to function for some time until it begins to work consistently.
Equipment fails as a due to water damage and to be replaced.
- Receptacles
- Signaling, Protection, and Communications Systems
- Surge Protective Devices
- Switches and Dimmers
- Transformers
- Uninterruptible Power Supply
- Wire or Cable (for dry areas)
- Arc-Fault and Ground-Fault Circuit Interrupters
- Batteries
- Lightning, ballasts, and LED Drivers
- Low and Medium Voltage Fuses
- Molded-Case Circuit Breakers
- Outlet and Junction Boxes
Water-damaged equipment that can be fixed
- Low-Voltage Power Circuit Breakers
- Motors
- Panelboards
- Switchboards
- Wire or Cable
- High Voltage AC Circuit Breakers
- Low and Medium Voltage Switchgear
- Low-Voltage Power Circuit Breakers
Products you need for water damage recovery.
Below are some of the products which are essential for water damage recovery. Let’s discuss that equipment: –
Fast dry contact cleaner
This is residue-free stuff, fast-drying, and high-powered spray that easily dissolves grease, light oils and also rinses away various other contaminants. Apart from that, it also increases performance, extends equipment life, and prevents electrical equipment failures.
Professional restoration
The top water damage San Diego has specialized equipment that helps them tackle a whole office and household wet gear and recover them from the total loss. Apart from ultrasonic cleaners and drying chambers of all sizes, they have many things that help them decolonize water. Professionals receive specialized training in all of the aforementioned areas. .
The bottom line
Water is an essential part of life, but when you talk about damage from water, it is the worst, which can take many lives and even damage all types of properties. So, if your electrical equipment becomes submerged for whatever cause, such as a natural disaster or a water leak, you may use the techniques outlined above to get it back up and running.
I hope you liked this post on water damage recovery for electronic and electrical equipment so that when you come to this situation you very well know what will be the exact solution!
Author Bio:- Robert Wong
Robot is a marketing manager at EZ Eletric. He has an interest in writing articles related to HVAC installation, maintenance, and repairs. The HVAC system has made our life convenient regardless of the climatic changes. Read Robot’s articles to know step-by-step installation guide for ceiling fan, smoke detector, lighting and electrical appliances in California as well as how to repair them in case of malfunctioning or breakdown.